Inspection flashlight. Brightness: 150/40 Lumens. Beam distance: 10 yards (side light), 20 yards (top light). Run time: 4/10 hours. Durable and practical with rubberized coating. Handy belt clip for easy transportation.

Latch on to a product that's both functional and inventive! Our helmet pencil clip adheres to a safety helmet with an adhesive pad to hold pencils, pens and carpenter pencils. This convenient tool can also be used to hold rulers or anything that needs easy access. Five bold colors from which to choose. Ideal for contractors, architects, engineers and maintenance workers. Sold as a blank product, but pad print imprinting available.

Bizflame 88/12 flame resistant shirt. ARC2. UPF 40+. Made of Bizflame 88/12: 88% Cotton, 12% Nylon, 7oz. Lightweight and comfortable. Dual hazard protection. Two chest pockets with button and flap closure. Pen division on left pocket. Shirt tail hem stays tucked in. Button cuffs for a secure and comfortable fit.

Two tone ANSI long sleeve work shirt. Made of Kingsmill Hi-Vis: 65% Polyester, 35% Cotton, 5.5oz. Hard wearing durable twill fabric with excellent dye retention. Back vent for breathability and comfort. 2 pockets for secure storage. Pen division. Button front closure. Available in sizes up to 4XL.

Kobuk breakaway vest. MeshAir aerated mesh fabric to increase air flow. 5-point breakaway, side and shoulder seams, center front. Chest pockets. Pen pocket. Internal pockets for safe storage. 4 pockets for ample storage.

Meets ANSI/ISEA 107-2020 Class 2 standards. A pocket and place for everything you need on the job. Durable twill fabric on the front. Mesh back provides a more breathable and comfortable fit. Left and right chest mic tabs. Reinforced right chest pocket. Dual layer left chest pocket with pen and tool slots. Two large lower pockets with grommets allowing easy access to flags or tape. Left and right chest spray can or water bottle pockets. Large pass-through back pocket with zipper closure for clipboards or tablets. Inside chest cell phone pocket. Two lower inside tablet size pockets with securing straps. Comfortable moisture wicking neck pad. Reflective tape sewn on for added durability.

Ansi Class 2 Moisture Wicking Performance Polo Shirt. Built tough with reinforced shoulder seams. Soft breathable 3.83oz 100% Polyester birdseye fabric. Lower placket mic or safety glasses tab. Reinforced pocket seams with separate pen slot. Breathable and flexible segmented reflective taping. If screen printed, safety garments are susceptible to possible shrinkage in overall size.

Stay visible on the job site with this ANSI 107 Class 2 complaint Surveyor's style safety vest! It has a solid front, mesh back, heavy-duty zipper closure, padded neck, and 15 pockets: 2 outer waist (expandable and can accommodate spray cans), 2 exterior waist with hook and loop closures, 2 interior waist, a large back with left and right zip access, and 2 exterior chest with 4 pen compartments. This also features mic tabs both sides and comes with grommets.

This PSV 5-point break-away ANSI 207 public safety vest features 3 pockets, a zipper, and AwareLite™ reflective trim. This conforms to ANSI/ISEA 107 standard for design, color and reflectivity and is made of a 100% polyester mesh top with tricot bottom. This also includes a left exterior chest pen pocket, 2 interior waist pockets measuring 11" W x 8" D, reflective tape backed by contrasting trim, an expandable fit, and mic tabs on both sides.

ANSI Class 3 Soft Shell Jacket features an outer soft shell fabric infused with Dupont Teflon Fabric Protector protects against the rain and will keep you looking your best with stain protection. Fully lined with a lightweight thermal lining to add warmth without the bulk. The three piece hood with draw cord offers a more comfortable fit. Includes a left sleeve pocket, right sleeve pen/pencil slots, right chest map pocket, two lower hand warming pockets and two large inside tablet sized pockets with zip closure. The reflective sewn taping and durable brass YKK zipper offers long-lasting quality.

This Class 2 premium surveyor safety vest is made of 100% polyester mesh with a tricot lower front and features a large back clipboard pocket on back side with left and right zipper access. This has a reinforced zipper, AwareLite™ reflective trim, and conforms to ANSI/ISEA 107 standard for design, color and reflectivity. This also features an exterior right chest radio pocket with a 1" gusset, an exterior left chest pocket with 4 pen compartments, 2 large exterior and 2 large interior waist pockets with flapped with hook and loop closure, and mic tabs on both sides.

Achieve greater visibility by putting on this Hi-Viz pink safety vest. It's a unisex fit polyester tricot safety vest with 2" Aware Lite reflective trim. It features a hook and loop front closure, 2 exterior waist pockets with hook and loop closures, and a left chest pocket with a pen compartment. This does not meet ANSI requirements.

Stand out visibly with this 3-in-1 class 3 bomber jacket! It's made of 100% polyester woven 300 denier oxford with PU Coating, and features a removable 100% polyester fleece liner and detachable hood (collar storage). The outer jacket has 2 waist slash pockets with rain guards, a right chest pocket with a zipper closure, a left chest radio/cell phone pocket (3.5"W x 5"D with 1" gusset), and 2 pen pockets on the left sleeve. The fleece jacket has 2 waist slash pockets, a right chest pocket with a zipper closure, and mic tabs on both shoulders of the outer jacket. Blank product.

Our best selling safety vest now available in black. This non-ANSI safety vest features 2" AwareLite reflective tape backed by contrasting trim that helps enhance the visibility of the wearer. This is constructed from durable polyester mesh for breathability with a zipper front closure, 2 exterior hook and loop closure waist pockets, and 1 left chest pocket with a pen compartment. It's ideal for industries or events that don't require ANSI certification. Blank product.

COMING SOON! Meets ANSI/ISEA 107-2020 Class 2 standards. A pocket and place for everything you need on the job. Durable twill fabric on the front. Mesh back provides a more breathable and comfortable fit. Left and right chest mic tabs. Reinforced right chest pocket. Dual layer left chest pocket with pen and tool slots. Two large lower pockets with grommets allowing easy access to flags or tape. Left and right chest spray can or water bottle pockets. Large pass-through back pocket with zipper closure for clipboards or tablets. Inside chest cell phone pocket. Two lower inside tablet size pockets with securing straps. Comfortable moisture wicking neck pad. Reflective tape sewn on for added durability.

Special 3 layer bonded soft shell jacket. The outer shell provides a windproof and water resistant finish and is constructed of breathable 96% polyester / 4% spandex. The thin breathable membrane between the outer shell and inner micro fleece provides additional wind and rain protection. The micro fleece inner layer provides extra warmth. Pockets include pen/pencil slots on right sleeve, zip pocket on left sleeve, map pocket on right chest, two lower hand warmer pockets with fleece lining and three inside pockets. Black reflective piping on sleeves and back add extra visibility. The YKK zipper and sewn reflective taping provides long lasting durability.

Stay in plain sight by wearing this reflective safety vest! Our non-ANSI safety vest is available in royal or red with a 2" AwareLite reflective trim helps enhance the visibility of the wearer. This is constructed from durable polyester mesh for breathability and features a zipper front closure, 2 exterior hook and loop closure waist pockets, and 1 left chest pocket with a pen compartment. It's ideal for industries or events that don't require ANSI certification. No extra charge for larger sizes. Blank product.

Stay safe in the most dangerous situations with out Class 2 flame-retardant treated safety vest. It's made of 100% polyester tricot and features 2 exterior waist pockets, 1 interior chest pocket, including 1 interior pen pocket, and flame-retardant treated background material. This does not comply with the flame-resistant requirements of ANSI 107-2010 Standard as an FR garment.

This Class 2 FR safety vest features a front zipper and is made of an inherent flame-resistant Modacrylic/Aramid blend. This complies with the requirements of ANSI 107 for a FR garment and meets ASTM F 1506. This features 2" Scotchlite reflective tape, FR binding and thread, 2 interior waist pockets, and an interior left chest pocket that includes a pen pocket.

This ANSI 107 Class 3, 3-in-1 bomber jacket has everything you need to be seen and protected. It comes in a lime color with a black bottom and is made of polyester 300 denier Oxford with PU waterproof coating. This features removable Hi-Viz lime fleece lining, a zipper closure, two lower slash pockets with zippers, a right chest phone pocket, left sleeve pen pockets, and mic tabs.